SOHO Joint Observing Plan 044: The Large Scale Structure of the Solar Minimum Corona



Authors: Douglas Biesecker and Sarah Gibson


Scientific Objective:

Our goal is to understand the large-scale, stable, coronal structure of 
equatorial helmet streamers and polar coronal holes that can persist 
for several solar rotations at solar minimum.  Although the corona 
does change dramatically, even during solar minimum, when a Coronal
Mass Ejection blows a huge quantity of mass outwards, it is to this 
stable background structure that the corona returns.  This
observed behavior suggests that it may prove useful to consider solar
minimum CME's as perturbations of the background corona.  Understanding 
the large-scale corona is also fundamental to understanding how and 
where the solar wind is accelerated.  The magnetic field structure in 
particular is fundamental to solar wind studies: knowledge of where 
the coronal field is open and where it is closed, as well as an 
understanding of how the expansion of the field varies from a purely 
radial expansion, are essential to studies of how the coronal field is 
related to fast and slow solar wind passing the earth.  We also would
like to clarify where the wind becomes important to coronal force 
balance, i.e. where the sonic surface lies.   

We therefore would like to quantify the density, temperature, and
magnetic field distribution throughout the large-scale, stable, mostly
static solar corona (i.e. 1 Rsun - 3 Rsun).  We would approach this
problem by using coronal observations as constraints on magnetostatic
models.  In previous work (Gibson, Bagenal, & Low JGR, 101, 4813, 1996;
Gibson & Bagenal, JGR, 100, 198651, 1995; Bagenal & Gibson, JGR,
96,17663, 1991), existing coronal models were used and new models were
developed to investigate the balance between magnetic forces and
gravitational and thermal forces in the presence of both bulk and sheet
currents.  These models were constrained by observations of the white
light corona (Mauna Loa MkIII and SMM Coronagraphs) and, to a lesser
extent, of the photospheric magnetic field (Stanford WSO Magnetographs).
Density, temperature, and magnetic field distributions were found that
matched the data to within observational accuracy.  However, the
considerable degeneracy of acceptable solutions that were found implied
that in order to specify the coronal plasma properties with confidence,
additional observational constraints were needed.

Observational Goals 

The observations needed for this modeling effort are included in 
those described in the Whole Sun Month Campaign.  Specifically, 
we will use coronagraph density, temperature, and velocity diagnostics,
as well as photospheric magnetic field observations and lower coronal
temperature and density diagnostics to be used as lower boundary conditions.
Observations of the corona above the region we will be modeling (i.e. >
3 Rsun) as well as solar wind observations, both coronal and in situ, are 
extremely useful as upper boundary conditions.  Details on these observations
are listed below.  We plan to make good use of these large and varied 
datasets as constraints on our models.  We have developed techniques 
utilizing genetic algorithms (Gibson and Charbonneau, BAAS, vol. 28 #2) 
that will make efficient use of many observational constraints in order 
to reduce model degeneracy and so choose the most physically realistic 
description of the solar minimum corona. 

***************************************************************************

			Details of Observations



1)  Outer Coronal Instruments


Motivation:

The outer coronal instruments provide the most direct information about
the large-scale coronal plasma.  Electron density can be determined from 
white light coronagraph images (particularly from polarized images).  
Electron temperature can also be determined from line ratios of the red 
and green iron lines, and electron temperatures and densities as well as
velocity distributions can also be studied using the coronal line profile
of the electron scattered component of HI Ly-alpha.  The proton density
distribution can also be deduced from the Ly-alpha distribution.  Proton and 
ion velocity distributions can be determined from various visible and ultra-
violet spectral line profiles.  Outflow velocities can be determined from
Doppler dimming and spectral line shifts.  Finally, magnetic field direction 
can be studied using the Hanle effect on the green iron line. 


 

Instrument:  LASCO

Contact:  Douglas Biesecker

Observations:

		
		C1, C2 and C3:  Daily, or several times daily:  3 polarized 
		white light (or poss. continuum) images taken at 120 degree 
		intervals from which polarized Brightness (pB) can be 
		determined (SEQPW). If possible, some of these polarized 
		images should be taken between 17:00 and 22:00 UT to overlap 
		with Mauna Loa observations (particularly C1 and C2).
		

		C1:  Daily:  Iron X and XIV (red and green lines) done
		with as long an exposure as possible to increase signal 
		to noise.
		

      * It is not yet known what the daily synoptic program will consist
	of.  It is likely that most of the images needed will be a part 
	of the synoptic program.  If necessary, extra observations may
	be taken during time devoted to special observations. *
	


	

Instrument:  UVCS

Contact:   John Kohl

Observations:

Overview

   The UVCS observations would consist of its standard synoptic sequences 
plus special observations providing additional plasma parameters and 
spatial coverage.  The emphasis would be on large scale structures, but 
fine structures such a polar plumes would also be observed.

Synoptic Observations     

   The UVCS synoptic program is run everyday (with rare interruptions) 
beginning at 01:00 UT and ending at about 14:30 UT.  The observations 
consist of eight sequences centered at position angles of 270, 
315,0,45,90,135,180 and 225 degrees respectively.  There are three different
sequences which are designed, respectively, for polar coronal holes, 
equatorial streamers, and mid-latitude regions. In all cases, the instrument
is configured for spectral line profiles of HI Ly-alpha and line 
intensities of OVI 1032 A and OVI 1037 A.  In the case of equatorial 
streamers, additional line intensities for heliographic heights below 2.0 
solar radii are also obtained.  For line intensity measurements, the spatial 
resolution is limited by statistics and by the slit widths (84" for 
intensities).

   The observed heights depend on the coronal target (i.e., position angle).
Equatorial streamers are observed up to 3.0 solar radii while mid-latitude
structures and polar regions are observed up to 2.5 solar radii.  The 
synoptic program also includes several visible polarized radiance 
measurements at the center of the nominal UVCS instantaneous field-of-view.

   The synoptic observations are suitable for line-of-sight HI velocity
distribution measurements and HI Doppler dimming analyses of radial bulk 
outflow velocity.  The ion intensity measurements are suitable for ion 
density determinations, elemental abundance calculations, and Doppler 
dimming and brightening analyses of radial bulk outflow velocity.  
Electron temperatures can be inferred from charge state intensities and
ratios.

Special Observations

UVCS special observations are performed about 10 hours per day.  
Normally, the observations for those time periods are chosen by the UVCS 
Lead Observation Scientist of the Week, but with special provisions for 
JOP's, Intercalibrations, and other instrument/spacecraft requirements.  
The UVCS Lead Observers for the Global Sun Month would design an 
appropriate set of observations which may differ somewhat from week to 
week depending on the particular interests of the UVCS Lead Observation 
Scientist of the Week.

   In general, UVCS would obtain line profile observations for OVI 1032 A 
and 1037 A in both polar coronal holes, and profiles for O VI and possibly
other ions in streamers.  A long duration observation in streamers might 
be used to determine the intensities of week spectral lines.  A long  
duration observation might also be used to resolve polar plumes.  HI 
Ly-alpha and Ly-beta observations would be used to investigate density
uniformity along the line-of-sight.  In addition, UVCS might attempt to 
measure electron temperature from coronal electron scattering of 
chromospheric HI Ly-alpha.  UVCS observations might also include heights 
above those covered in the synoptic program.  The details of the special
UVCS observations are yet to be determined.
   




2) Transition region and lower coronal instruments:  CDS, SUMER, EIT.


Motivation:

By taking full Sun images daily, a 3-dimensional picture of the lower
corona would be gained from these instruments.  The observations would
then be used to determine temperature, density and emission measure in the
smaller scale structures that underlie the large scale structures observed
by the coronagraphs.  Moreover, the three-dimensional images would trace
the coronal hole boundary structure on small and large scales at low and
high altitudes, which could then be compared to large-scale coronal field
predictions.  Similarly, observations of polar plumes may trace the
non-radial divergence of the large scale-field at the poles.  Finally,
off-limb observations can be used to try to directly compare density
predictions obtained with the upper coronal instruments to those found
with the lower coronal instruments. 

The lower coronal observations should be coordinated so that they coincide
temporally and spatially as much as possible.  These SOHO observations
will also be coordinated with Yohkoh observations (David Alexander will be
the liason with Yohkoh.)




Instrument:  CDS 

Contact:  Andrzej Fludra

Observations:
  
The acronyms listed below are examples of specific planned CDS science studies. 
They may be appropriate as they stand for the Whole Sun Campaign, or may
need to be slightly modified.


		Daily (or every other day): get full disk images (FSUN.) 
		Use strongest lines to minimise duration of observation. 

		Weekly: run a slower, more comprehensive version of FSUN.  
		(Use weaker lines if necessary for accuracy.)

		Every other day:  run observations of coronal hole 
		boundaries (e.g. run BOUND - on-disk, and CHSTR - off-limb.)


Other possible observations:

		Off-limb observations, out to 1.1 Rsun, using the same ions 
		as LASCO (LABP2W, or OLICS).
	
		Plume observations.




Instrument:  SUMER

Contact:  Don Hassler 

Observations:

		Daily (or every other day - coordinated with CDS):  
		observations of full disk at lower resolution, either 
		just intensity in one line, or moment observations (i.e., 
		emission measure, temperature, and non-thermal broadening
		analysed in flight.)

		Weekly (coordinated with CDS):  high resolution full disk 
		image in 3 lines. 


      		Every other day (coordinated with CDS):  synoptic 
		observations of swaths across both poles, possibly also 
		at equator, extending off limb.  




Instrument:  EIT

Contact:  Joe Gurman

Observations:

		Daily synoptic maps of Iron lines Fe IX-X, Fe XII, and Fe XV.

		*  No special observations required.  *



		
3)  Photospheric boundary conditions

Motivation:
 
 Full disk images over a full rotation can be analyzed for a spherical
 harmonic decomposition of the large-scale photospheric field, and be used
 as a lower boundary condition on the coronal field.  Also, high-resolution
 observations of dynamic changes of the magnetic field when combined with the
 high resolution observations of the transition region and coronal instruments
 will show if changes in photospheric field affect coronal structures.
  
   
    
Instrument:  MDI
     
Contact:  Todd Hoeksema

Observations:
       
       		Normal daily full-disk magnetograms for the entire rotation
	       (~15 per day at 4" resolution)
					
		Weekly high (1.2 ") resolution campaign to be coordinated
		with SUMER/CDS/YOHKOH  (several observations can be taken
		during the time needed to run the high-res SUMER/CDS images)
		of a smaller region (approx. 1/3 the solar disk, starting
		just north of the equator).
															 

		* must schedule high/res during VC2/VC3 high rate data hours *
														   
   

4) Solar Wind Instruments:

Motivation:

Given a prediction of the large-scale coronal density, magnetic field, and
temperature, solar wind models can be evolved along the field lines, and
compared to in situ observations.  In situ observations of fast and slow
wind can be mapped back to the solar surface to see if they come from open
or closed regions.  In situ magnetic field and mass flux can be compared
to extrapolated solar wind predictions. Finally the in situ measurements
can give a coronal electron temperature prediction based on where in the
wind different elements freeze in. 

In addition to SOHO/CELIAS, other non-SOHO solar wind instruments such as
Ulysses, Wind, and IMP, may wish to contribute data from the month of 
September.  Toni Galvin will help coordinate these external involvements, 
under the auspices of IACG Campaign IV, Solar Structures of Heliospheric 
Structure Observed out of the Ecliptic.



Instrument:  CELIAS

Contact:  Toni Galvin

Observations:

		Standard daily observations

		* No special observations required. *

Details:

* The actual data set will be partly determined by the solar wind
conditions.  (Some instrumental responses are a function of the solar wind
speed or intensity.) *

CELIAS MTOF Proton Monitor can give solar wind proton speeds (within 5%
uncertainty) and densities (within 20% uncertainty).  This can be used to
help identify the type of solar wind, and for mapping back to the
Carrington longitude to find the "source".  The MTOF mass spectrometer
will provide what it can on elemental composition solar wind speed, so we
will have to look at the data but should come up with at least some
selected time periods.) Elemental abundances are expected to vary
depending on the source of the solar wind (slow vs. coronal hole).  Fred
Ipavich, the MTOF Lead CoI, has approved MTOF participation. 


CELIAS CTOF can give solar wind minor ion (e.g., oxygen, silicon, iron)
velocities, abundances, thermal velocities, and charge state
distributions. The charge state distributions are used by modelers to
estimate coronal electron temperatures and perhaps temperature profiles. 
Heiner Gruenwaldt, the CTOF Lead CoI, has approved CTOF participation. 

CELIAS STOF - if the sun is not as quiet as hoped, there may be SEP
events.  Martin Hilchenbach, the STOF Lead CoI has approved STOF
participation. 

***************************************************************