Study 000334: ** Obsoleted by author, replace by V2 ** ACRONYM: HPW017AR_30x400_30s * This is a narrow raster that can be expanded using ASRC (see below) * This raster is designed for active region observations and includes Ca XIV, XV, XVI, and XVII lines in addition to all of standard Fe lines. Fe XXIII and XXIV are present. Cooler Mg lines are also included. A complete line list is given below. The extensive line list leads to a lot of telemetry being generated. Using DPCM compression 47.7 Mbits will be generated for each run of this raster. It may be possible to use higher compression levels, but many of the interesting lines are weak and this may complicate the analysis. Lower telemetry studies with fewer lines exist and may be a better choice when a limited data volume is available. 181.90 16 # Ca XV 181.900 184.54 24 # Fe X 184.536 186.75 32 # Fe VIII 186.601, (Ca XIV 186.610), Fe XII 186.880 188.40 32 # Fe XI 188.216, Fe XI 188.299, Fe IX 188.497, S XI 188.675 192.20 32 # Fe XXIV 192.04, Fe XII 192.394 192.82 24 # Fe XI 192.813, Ca XVII 192.858 193.87 24 # Ca XIV 193.874 195.12 24 # Fe XII 195.119, Fe XII 195.180 201.05 24 # Ca XV 200.972, Fe XIII 201.121 202.04 24 # Fe XIII 202.044 203.83 24 # Fe XII 203.720, Fe XIII 203.826 208.50 32 # Ca XV 208.324, Ca XVI 208.604, (Fe XIII 208.679, Ca XV 208.722) 255.00 32 # Fe XVII 254.87, Fe XXIV 255.10 256.48 32 # He II 256.317, Si X 256.366, S XIII 256.686 262.98 24 # Fe XVI 262.984 263.98 40 # Fe XXIII 263.76, S X 264.233 270.52 24 # Mg VI 270.394, Fe XIV 270.519 275.40 24 # Si VII 275.352, Fe XVII 275.54 276.30 40 # Mg VII 276.153, Mg V 276.579 278.40 32 # Mg VII 278.402, Si VII 278.445 280.74 24 # Mg VII 280.737 284.16 24 # (Al IX 284.015), Fe XV 284.160 TARGET: Active Region EXPOSURE TIME: 30s RASTER: Scanning SLIT: 1" STEP SIZE: 1" FOV: 30"x400" RASTER DURATION: 16m44s VOLUME: 47.7 Mbits RATE: 46.5 kbits/s COMPRESSION: DPCM Pointing: --------- Any interesting place within the active region. Use/Instructions to planners: ----------------------------- This is a narrow raster that can be expanded using ASRC. If used with ASRC, use the following ASRC parameters: * Set the raster repeat parameter and enable ASRC. Direction: Leave in FORWARD position (ASRC specific) SKIP: Don't change -> 1 (ASRC specific) Compensation steps: Set to 120 Warning: -------- None.