Study 000375:

ACRONYM:  SK_DEEP_5x512_SLIT1

Deep exposure scan covering 5x512 arcsec with step size
of 1 arcsec. Spectral lines are selected to achieve precise
velocity measurement in a wide temperature range.

Study summary:
--------------
slit:		1"
step size:      1"
window height:	512"
exposure time:	120 sec
# of pointing:	4
duration:	10 min 40 sec
Volume:		7 Mbits

Line list:
Fe VIII 186.60
Fe X 184.54/257.26
Fe XI 180.40/188.30
Fe XII 192.39/195.12
Fe XIII 202.04
Fe XIV 264.79
Fe XV 284.16
He II 256.32
O IV 279.93
O V 192.75/192.91/248.46
Mg VI 268.99
Si VII 275.35
Si X 261.04

TARGET:
------

Quiet region at disk center or off-limb region

Instruction to planner:
----------------------

If you obtain full height spectrum (Y range:1-1023),
three consecutive scans must be performed with following
Y initial positions (YIP) in the EIS planning tool;
YIP = 1    (Y range:1-512)
YIP = 256  (Y range:256-767)
YIP = 512  (Y range:512-1023)
The first and the last ones record the bottom and the top halves.
The middle one is needed to bridge the top and the bottom spectra.
Mirror initial position (MIP) must be an identical number in all scans.
Spacecraft pointing should not be changed during the consecutive scans
(tracking is fine), i.e. all three pointings must be to the same region.

XRT support:
------------

It would be useful to ask XRT planner for a context image.

Warning:
--------

Some intense lines might be saturated in active regions.