Study 000401:

ACRONYM:  arm_fastslot_v2

This study is slightly modified version of raster 'arm_fastslot' which
is part of  arm_fastslot_waves (study # 174). Mainly for high frequency
oscillation study. Modifications are done to suit current data rates
and volume.  

Modifications: No. of pointings reduced from 1000 to 150, exposure times
are doubled, and Fe XIII 202.04 line is added to the line list.

TARGET        : Active region.
EXPOSURE TIME : 4s
RASTER TYPE   : Sit'n'Stare
SLOT          : 40" 
# of pointings: 150
DATA COMP.    : JPEG98
RASTER DURATON: 16m
DATA volume   : 85 Mbits  
LINES         : Fe X, XII, XIII, XV, He II, Si VII, Ca XVII

POINTING:
---------
Active region on disk showing many distinct loops. if the loops
are just off-limb they could also be considered. Keep the position of
slot such that it covers a set of loops  inside the contex raster completely.

INSTRUCTION TO PLANNERS:
------------------------
For HOP 156 the studies should be run in the following order.

* Run arm_raster_ar (context raster)
* Run arm_fastslot_v2 (slot sit'n'stare)
* Run High_cadence_AR_dens (slit sit'n'stare). This study should be repeated
3 times at 3  different locations (loop top & foot point are must) on a well
defined loop within the slot.

WARNINGS:
---------
* Run preferably during SAA-free time period. 
* The data rates are slightly higher (~90 Kbps)