Study 000565:

ACRONYM: fullccd_scan_m30

This study is for measuring the plasma properties (temperature, abundance, and density) along a active region
loop or flaring loop structure at the limb depending on its height with Full CCD spectra. For investigating
temporal evolution of properties with high time cadence, we use the sparse raster scan (4" step).

Target: Limb AR or limb flare
Raster: Scanning
Slit: 2"
Step size: 4"
FOV: 122"X160"
Exposure: 30s
Data rate: 139.1 kbits/s
Data volume: 144.29 Mbits
Duration: 17 min 17 sec

Lines: Full CCD 

Pointing:
---------

Limb active region or flaring loop. The slit needs to include more quiet sun at the top or bottom of the
FOV forthe velocity calibration.

Instructions to planners:
-------------------------

This is the large sparse raster scan. A context raster (PRY_slot_context_v3) should be run before and after the
sequence.

Warning:
-------

1) The raster has a high data rate (139 kbits/s)
2) The data volume of this study is quite large (144 Mbits). Therefore, it is recommended to use this study
if EIS get more telemetry for the limb observation.