TLM Machine Displays

TLM Machine Displays

To bring up displays on the TLM machine if software was fully taken down

  • Close all the windows on the TLM machine
  • Go to the toolbar at the bottom of the screen and click on the DISP icon
  • Select the TLM Display, CMD Display, Event Display, TLM Sessions, CMD Sessions
  • The Event Log Window should come up and hit okay so the event log comes up at the bottom of the screen (you may have to widen this to see the entire line)
  • The SOHO EOF Telemetry Distribution Display window goes at the top of the screen
  • The SOHO EOF Command Status Display window goes on top of the Telemetry window but about three quarters of the way down the screen
  • The IWS Telemetry Session Status window goes on top of the Command Status Display window on the right
  • The IWS NRT Commanding Session Status window goes on top of the Command Status Display window on the left

    • To bring up displays on the TLM machine if commanding only was taken down

  • Close the NRT Commanding Session Status window and the Command Status Display window
  • Go to the toolbar at the bottom of the screen and click on the DISP icon
  • Select CMD Display and CMD Sessions
  • The SOHO EOF Command Status Display window goes on top of the Telemetry window but about one third of the way down the screen
  • The IWS NRT Commanding Session Status window goes on top of the Command Status Display window on the left

    • Location: /u/ecs/soc/info/TLM_displays_info.html